2 53 29 271
2
3
E930A260
1 Read fully through the installation instructions and check that all the parts are present in the kit.
2Lay covers on the wings and remove the cap on the coolant system expansions tank.
WARNING
Take care if the engine is hot. The coolant will also be hot. You could get burnt if you brush against the exhaust manifold.
3Raise the car. Use a receptacle to collect the coolant. Remove the air shield behind the bumper, connect a hose, open the drain plug and drain the coolant.
4Lower the car to a suitable working height for fit- ting the connector plug to the bumper shell.
Saab
