Saab B235, B205 installation instructions Fill up with coolant and check the system for leaks

8 53 29 271

25 Check the ground connection between the ground pin on the connector plug, the heater casing and the car body.

26Fit the heat shield, lubricate the bypass pipe O- ring with acid-free petroleum jelly and fit the tur- bocharger delivery pipe, including the bypass pipe. Connect the vacuum hose to the bypass pipe and the hoses and connector to the turbo- charger delivery pipe. Fit the engine cover.

27Fill up with coolant and check the system for leaks.

28Bleed the cooling system in the following way:

Note

The A/C or ACC should be turned OFF.

Fill the coolant system to the MAX level. Close the expansion tank cap. Start the engine and run to operating temperature at varying engine speeds until the radiator fan cuts in. Carefully open the expansion tank cap and top up to the MAX level. Close the cap. Switch off the engine and if necessary top the coolant up to the MAX level.

29Check that the cooling system does not leak and that the heater works.

30Place the installation instructions in the car and draw the customer's attention to the user instructions.

Saab 9-5 B205, B235