SERVICE MOWER

H

I

L

JK

MX7681; MX10517

a.Route cable under mower belt and brake rod and attach cable spring (H) to idler sheave bracket (I).

b.Pull out on cable (J), align black end of cable with slot in bracket (K) and release cable into slot. Secure with spring locking pin (L).

11.Level mower.

A

MX10511

a. Remove three capscrews and belt shield (A).

B

C

b.Loosen sheaves (B) and belt guides (C).

c.Remove mower belt.

4.Inspect belt for wear or damage; replace as necessary.

5.Clean top surface of mower deck and sheaves.

Replacing Mower Drive Belt (107 cm (42 in.) Deck)

cCAUTION: Avoid injury! Rotating blades are dangerous. Before adjusting or servicing mower:

Disconnect spark plug wire(s) to prevent engine from starting accidently.

Always wear gloves when handling mower blades or working near blades.

1.Park machine safely. (See Parking Safely in the SAFETY section.)

2.Remove mower deck.

3.Remove drive belt.

D

MX10512

6.Install belt on mower deck as shown. Make sure belt is in the groove of each sheave and inside belt guides (D).

7.Tighten sheaves to 47 N•m (35 lb-ft).

8.Install belt shield(s).

9.Install mower deck.

10.Adjust mower belt tension and spindle brakes, if

Service Mower - 37

Page 41
Image 41
Sabo 108-17 HS manual Replacing Mower Drive Belt 107 cm 42 in. Deck