Sagem 700 manual Listening To Music, button

LISTENING TO MUSIC

When using the FM Radio function for the first time, remember to plug the FM antenna plug into the FM antenna connector on the rear panel. Stretch out the antenna cable as far as you can.

Once the antenna cable is properly connected, activate the "Update List" function to scan the available FM stations. It takes few seconds to perform the scan operation. After that, you can tune into the stations.

The following screen shots illustrate the sequence used to pre-set the FM stations and tune into a radio station 98.70 MHz and listen to a program broadcast from it.

	Screen on the		Screen shot		Next screen		Comment
	right
1		.		"	"	button	Initial screen
				or "OK" button
2		:
3	" " button			"	"	button
	(2 times)			or "OK" button
4							Pre-setting the FM
							station list
							according	to the
							signal	reception
							quality.
5							There	are
							15 stations tuned.

41