
APPENDIX
6.Appendix
6.1.Care and Maintenance
Switch off your Radio IP. Use a smooth and dry cloth to wipe it. Do not use a rough cloth, powerful liquid cleaners, thinner painting, alcohol nor other solvents to clean it. These products can damage your IP Radio.
6.2.Problems
Refer to the table presented below in case of an operational malfunction:
Problems | Remedies |
|
|
The remote control does not | • Check that the batteries are correctly introduced. |
function. | • Check that you too are not far from the Radio (7 meters are the |
| maximum recommended) and that the |
| blocked. |
| • Make sure that the remote control is well pointed towards the sensor, |
| when manipulating the Radio. |
|
|
The screen is switched off. | Make sure that : |
| • the power adapter is properly connected to a power socket. |
| • the power connector is properly plugged into the Radio. |
| • your fuse and |
| socket is powered. |
|
|
Choosen station can not be | • To hear the station, you must confirm your selection by pressing OK |
heared. | button. |
| • Make sure that your Radio is not set to MUTE mode. |
| • Check the volume level. |
| • Check the network configuration. |
|
|
Audio parasites or clearness | The frequency FM is disturbed by parasites. Deploy the FM antenna jack |
less. | until obtaining a high signal. |
| If you use |
|
|
Access denied to the Internet | Check the |
Radio. |
|
|
|
Access denied to the Radio | Check that your Radio is not encoded. |
from a personal computer as | else you must have the encoding key to access. |
an access point (Media |
|
Server). |
|
|
|
The alarm does not ring. | Check that the alarm source is configurated well (sample: the mp3 player |
| is disconnected,...). |
|
|
57