Sager Electronics STP-HD200

SageTV HD Media Extender Page 4

Model STP-HD200

For additional support, go to www.sagetv.com/support.html or email us at support@sagetv.com

current resolution. For each valid resolution, check-mark its button to enable it. Then,

when using the player in client mode (connected to a SageTV server), use the Video Out

button to toggle the output resolution between the ones check-marked here. 2) The

current resolution set on the resolution selection menu will be used as the default

resolution when connecting to a SageTV server.

Audio Output – Choose this option to configure which audio output port to use. Select

from Analog (stereo L+R), S/PDIF (optical), or HDMI.

Advanced Setup – Displays the advanced Detailed Setup options used to configure

various options for stand alone mode. On this menu, various options can be configured to

control the use of the HD Theater only in stand-alone mode. Note: When used as an

extender or placeshifter client connected to a SageTV server, similar settings are

available in the client’s user interface. Those settings are only used when connected to a

SageTV server.

As the available options are highlighted on the right side of the screen, brief text

explaning the option will be shown at the bottom of the screen.

For basic configuration, please note a few options that you may wish to consider:

oGeneral

Import Directory Management – Choose whether the player should

automatically scan all folders on your local network and attached devices

to find media files or whether you will manually specify the import folders

to be scanned. Note: Import directories can be manually selected from the

Filesystems menu.

Automatic Library Rescan Frequency – Configure the number of hours

between automatic library rescans. To disable automatic rescans, enter 0.

oMultimedia

Overscan Settings – If the menus do not fit the TV screen properly, use

this option to modify the placement of the user interface. Through a series

of two full screen menus, you will first adjust the location of the upper left

corner of the user interface, then you will adjust the location of the lower

right corner of the user interface. When you are done, the user interface

will completely fill the display.

Display Aspect Ratio Settings – If the pictures and text on the user

interface appear stretched, use this option to define the aspect ratio of the

TV display. After selcting this option, you may choose from a few pre-set

choices, or manually adjust the circle until it appears round.

oServer

Windows File Server – If you would like ot be able to browse the files on

attached devices from a Windows PC on your local network, enable this