B) Drivers and Programming Software For Advanced Users
1 Follow points 1 – 7 of the install procedure in A),then at the Software Setup screen, select Install the SST Programming Software and
click Next.
2 In the following Software Setupscreen, click Next and follow the on-screen instructions. At this point you will be asked to install such
features as the Saitek Magic Mouse,HID-compliant mouse, Saitek Magic Keyboard andHID Keyboard Device (these are what XP
calls the various elements of your Saitek controller). Continue to click on Nextand Finish to accept the installation until the Registration
screen appears.
3 At the Registrationscreen, select Check this box to register now and follow the on-screen instructions, or do not select this option and
register later.
4 Upon completion of the installation, you have the option to Run Profile Editor, which will give you a view of the 3D programming
environment. If you do not wish to see the Profile Editor at this point, just uncheck the box and click on Finishto complete the installation.
INSTALLATION FOR USERS OF WINDOWS® 2000A) Drivers Only For Typical Users
1 With your computer switched on, close down any programs that are currently running and insert the Saitek Smart Technology CD into your
CD-ROM drive.
2 When the Introduction Screen appears, click Install Softwareto continue.
3 When the Welcomescreen appears, click Next to continue. (If the CD does not run automatically, select Start from the Windows® Taskbar,
then Run and type D:\Setup.exe and click OK - where D:\ is letter of your CD-ROM drive).
4 After reading the Disclaimer, select the I accept the terms of the Disclaimeroption and click Next to continue.
5 At the Device Driver Installationscreen, click on Next and follow the on-screen instructions.
6 When prompted, plug your controller’s USB connector into your computer, then click on Configure.
7 When the Controller Propertiesscreen appears, click Next to view the Test screen.
8 Now try out all your controller’s buttons and controls to show that it is working properly. When you have finished, click OK.
9 At the Programming Software screen, select Typical Userand click Next.
10 At the Registration screen, select Registerand follow the on-screen instructions or select Register Later and click Next.
11 Click on Finishto complete the installation.
B) Drivers and Programming Software For Advanced Users
1 Follow points 1 – 7 of the install procedure in A), then at the Programming Softwarescreen, select Advanced User and click Next.
2 At the Programmable Controller Driversscreen, click Update and follow the on-screen instructions.
3 Then at the Installation of programming software successfulscreen, click Next.
4 At the Registration screen, select Registerand follow the on-screen instructions or select Register Later and click Next.
5 Upon completion of the installation, you have the option to Run Profile Editor, which will give you a view of the 3D programming
environment. If you do not wish to see the Profile Editor at this point, just uncheck the box and click on Finishto complete the installation.