Snowflake Cookies

1/2 cup butter, softened
1/2 cup margarine, softened
3 ounces cream cheese, softened
1 cup sugar
1 egg yolk
1-1/2 teaspoon coconut extract
2-1/2 cups all-purpose flour
1/2 teaspoon baking soda
1/2 teaspoon salt
1/4 teaspoon cinnamon
powdered sugar
1. Preheat oven to 375˚F.
2. Use an electric mixer to cream the butter and margarine until
fluffy. Gradually beat in the cream cheese and sugar.
3. Add egg yolk, coconut extract and mix well.
4. Sift the flour, baking soda, salt and cinnamon together. Add
half of the flour mixture to the butter mixture and beat until
smooth. Repeat with the rest of the flour mixture.
5. Fill the Cookie Press with dough and select Cookie Disc 2, 6,
8, or 10, or other. Form the cookies on ungreased cookie
sheets. Dust with powdered sugar.
6. Bake 10-12 minutes. Remove from cookie sheets and cool on
wire racks.
Makes 7-8 dozen
18
Assembly Instructions
1. Attach Cam Shaft to the Press Disc by inserting stem of the Shaft
into the Press Disc’s center hole. Press firmly. You will hear a click
as the Shaft snaps in place. (See Figure 1.)
2. Line the Tabs on the Motor Body up with the slots on the Cam
Disc. Insert Cam Disc into the Motor Body. Using the two Grips
on the Cam Disc, turn slightly clockwise until the Disc clicks into
position. (See Figure 2.)
3. Fit the Shaft all the way inside the
unit, the outside contours of the
2 Discs will line up. (See Figure 3.)
NOTE: Turn Cam Disc one click
counter-clockwise if Shaft is
difficult to insert into Motor Body.
4. Select a Disc and place it inside the Tube Cover. Then place the
Tube into the Tube Cover, turning clockwise until locked. (See
Figure 4.)
5. If a Filler Tip is to be used, refer to Figure 5 and fit the desired Tip
over the Filler Tip Adapter and secure it with the Filler Tip Cover.
Place the Filler Tip Assembly inside the Tube Cover. Then place
the Tube into the Tube Cover, turning clockwise until locked. (See
Figure 5.)
LOCK
Figure 1
Figure 4
Figure 5
Filler
Tip
Cookie Disc
Filler
Tip Cover
Tube Cover
Tube Cover
Tube with Tip Assembly
Tube with Disc Assembly
Figure 2
Tip Adapter
5
Tabs
Slots
Cam Disc
Grips
Figure 3
CKM25_COOKIE_IB_4/7/02 5/7/02 15:45 Page 11