Manuals / Samson / Home Audio / Stereo Amplifier

Samson 1200, F800 owner manual Bridged Mode

Models: 1200 F800

1 14
Download 14 pages 40.86 Kb
Page 9
Image 9

Bridged Mode

The F1200 / F800 provides a rear-panel switch that allows it to be used in either a Stereo or Bridged mode. When this switch is placed in the “STEREO” (right) position, the F1200 / F800 functions as a true stereo amplifier, where both of the two independent amplifier channels (Channel 1 and Channel 2) can receive dif- ferent input signals and produce independent output signals. However, when the switch is placed in the “BRIDGED” (left) position, the Channel 1 inputs signal is routed to both power amplifiers bridged together, producing a single output sig- nal with a true 1200 watt output into a single 8 ohm channel (in the case of the F1200) or a true 800 watt output into a single 8 ohm channel (in the case of the F800).

WARNING: Bridged mode is to be used only when the F1200 / F800 is con- nected to an 8 ohm speaker load. Use of Bridged mode with speaker loads of 4 ohms or less can result in severe damage to the unit due to excessive heat and current limiting and will void your warranty!

The illustration on the right shows how this works. In Bridged mode, the polarity (phase) of the Channel 2 output signal is reversed relative to that of the Channel 1 output signal. Both channels then process the same input signal, with the speaker load connected so that power is derived from both channels. The effec- tive voltage swing seen by the load is thus doubled, so that the power output is doubled.

When using the F1200 / F800 in Bridged mode, be sure to connect your loud- speaker as shown in the illustrations on page 10 and 11 (and as silkscreened on the rear panel), with the red (+) terminal of the Channel 1 output connected to the negative input of the speaker and the red (+) terminal of the Channel 2 out- put connected to the positive input of the speaker. Do not use the black ground (-) output terminal of either channel (the speaker load must “float” away from the amplifier chassis).

See pages 10 in this manual for interconnection diagrams when using the F1200 / F800 in Bridged mode

MODE SELECTOR

BRIDGEDSTEREO

Bridged / Stereo switch

OUTPUT

CHANNEL 2

CHANNEL 1

MINIMUM LOAD IMPEDANCE

+

-

STEREO -

+

(4Ω /CHANNEL)

 

 

 

BRIDGED MONO

-

+

 

(8Ω )

 

 

 

 

Bridged Mode

INPUT

CHANNEL

1(+) OUTPUT

CHANNEL

2(+) OUTPUT

9

Page 8 Page 10
Page 9
Image 9
Samson 1200, F800 owner manual Bridged Mode
Page 8 Page 10

1200, F800 specifications

The Samson F800 and F1200 are two dynamic models in the realm of professional audio gear, designed to deliver exceptional sound quality and versatility for various applications. These state-of-the-art mixing consoles cater to both live sound and studio environments, making them a favorite among audio engineers.

One of the standout features of the Samson F800 and F1200 is their robust input and output configuration. The F800 offers eight mono channels, while the F1200 expands this to twelve, allowing for extensive mixing capabilities. Each channel is equipped with high-quality preamps that offer low noise and high headroom, ensuring clarity and detail in sound reproduction. The consoles also feature essential EQ controls, including three-band equalization with sweepable mids, allowing engineers to shape their audio precisely.

Both models boast an intuitive user interface, making it accessible for both beginners and seasoned professionals. The layout is designed for efficiency, with dedicated controls that allow quick adjustments during live performances. The consoles include faders that are smooth and durable, facilitating precise mixing and transitions during dynamic sessions.

The Samson models incorporate cutting-edge digital technologies. They offer USB connectivity, enabling direct interfacing with computers for recording and playback. This feature is particularly beneficial for those in home studio setups or requiring mobile recording solutions, as it allows engineers to easily capture high-quality audio without additional equipment.

Additionally, the F800 and F1200 come with impressive digital effects built into the system. These include reverb, delay, and modulation effects, providing engineers with a toolkit to enhance sound without the need for external processors. This integration makes it easier to achieve polished mixes efficiently.

Portability is another key characteristic of these consoles. Their lightweight construction allows for easy transport, making them suitable for bands on tour, mobile DJ services, and event productions. Despite being lightweight, they remain durable and built to withstand the rigors of frequent use.

In summary, the Samson F800 and F1200 mixing consoles deliver exceptional performance with their robust input configurations, intuitive interfaces, integrated effects, and portability. They are a testament to Samson's commitment to quality and innovation in the audio industry, making them ideal choices for both live sound engineers and studio professionals alike.