Samson manual The microphone shall be a SAMSON R11, Architect’S & Engineer’S Specification

ARCHITECT’S & ENGINEER’S

SPECIFICATION

The microphone shall be of a dynamic type with hypercardioid polar pattern. The microphone shall provide its output on a male XLR-type connector. Output impedance shall be 600 ohms.

The microphone shall be constructed of a zinc casing and shall contain a triple-plated multi-stage windscreen and noise filter for the removal of pops, sibilance and onstage noise, an aluminum humbucking voice coil for the elimination of magnetic field interference and true hum rejection, a Neoprene transformer cover for the reduction of microphonics, a high-output Neodymium element, and a multi- axis shock-mount to minimize handling noise.

The microphone shall be equipped with an On/Off switch. The microphone shall have frequency response from 50 Hz to 15 kHz, sen- sitivity of -71 dBV at 94 dB SPL, and a maxi- mum SPL of 137 dB. Dimensions shall be 1.8″ (46 mm) head length, 4.2″ (107 mm) main unit length and 6″ (152 mm) total length. Weight shall be 10.5 oz. (300 g). The micro- phone shall carry a three-year warranty.

The microphone shall be a SAMSON R11.

R11 SPECIFICATIONS
Type:	Dynamic
Polar Pattern:	Hypercardioid
Frequency Response:	50 Hz - 15 kHz
Sensitivity (0 dB = 1 V / 0.1pa @ 1 kHz):	-71 dB ± 3 dB
Max. SPL	137 dB
Output Impedance (@ 1 kHz):	600 Ω (Lo Z)
Connector:	3-pin XLR male
Switch:	On/Off
Dimensions:	6″ • 152mm
Weight:	10.5 oz. • 300g

SAMSON	10
Measuring Obj.;	(dB) 0
R11
	-10
	-20
	-30
	-40
	20	50	100	200	500	1000	2000	5000	10000	20000
					Frequency(Hz)

FREQUENCY RESPONSE

Specifications subject to change without notice. © 1998 SAMSON