Samson RESOUND RS12M Architect’S & Engineer’S Specifications, RS12M SPECIFICATIONS, Resound

PRODUCT SPECIFICATION SHEET

SERIES	DESCRIPTION
RESOUND	MONITOR SPEAKER

FEATURES (continued)

>Neutrik Speakon® plus 1/4-inch Extension output connectors also allow you to “daisy-chain” multiple Resound models together to create larger sound reinforcement systems.

>Internal 18 dB/octave crossover with high frequency lamp protection.

>The RS12M floor monitors offer two projection angles to adjust the sound coverage for different size stages.

>Rugged, road-worthy carpet covered enclosures with steel speaker grills for high reliability.

>Quality build and rugged construction ensure reliable performance from night-to-night and venue-to-venue.

>Three-year extended warranty.

ARCHITECT’S & ENGINEER’S SPECIFICATIONS

	CATEGORY		RS12M
	PUBLIC ADDRESS
RS12M SPECIFICATIONS
Power Rating (@ 8Ω)		175 Watts RMS,
		300 Watts Peak
Nominal Impedance		8 Ohms
Frequency Response		50 Hz – 20 kHz ± 3 dB
Sensitivity		94 dB SPL @ 1W/1m
MAX SPL		116dB
LF Driver		12-inch heavy-duty driver
HF Driver		1-inch exit, 44mm Mylar
		diaphragm compression driver
Protection		Internal overload Lamp on HF
		driver
Mounting		25º and 30º wedge monitor
		position
Weight		37 lbs. (16.8 kg)

The Samson RS12M shall be a small format wooden PA or monitor cabinet. It shall have a 12 inch low frequency driver and a one inch throat horn loaded with a 44mm compression driver for the high frequencies. It shall have two tuned ports. It shall have both 1/4 inputs and 1/4 inch extension outputs. It shall have Speakon inputs and Speakon extension outputs. The cabinet shall have two side handles. The cabinet shall have two rear panel angles for long throw and short throw situations.The Samson RS12M shall have a power handling capacity of 175 Watts. It shall be an 8 Ohm configuration.

606mm

386.9mm

326.1mm