Samson XP25I owner manual To qualified service personnel or equivalent

Important Safety Information

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.This apparatus shall not be exposed to dripping or splashing liquid and

no object filled with liquid, such as a vase, should be placed on the ap- paratus.

6.Clean only with a dry cloth.

7.Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Only use attachments/accessories specified by the manufacturer.

10.Unplug this apparatus during light- ning storms or when not in use for long periods of time.

11.Do not override the intended pur- pose of the polarized or grounding- type plug. A polarized plug has two blades, with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or third prong is provided for your safety. If the pro- vided plug does not fit your outlet, consult an electrician to replace the obsolete outlet.

12.Protect the power cord from being walked on or pinched, particularly at the prongs, convenience receptacles, and the point where they exit from the apparatus.

13.Use only with the cart stand, tripod bracket, or table specified by the manufacture, or sold with the apparatus.

When a cart is used, utilize caution when moving the cart/apparatus combination to avoid injury from tip-over.

14.Refer all servicing to qualified service personnel. Servicing is required if the apparatus has been damaged in any way, such as power-supply cord or plug breakage, damage due to liquid or objects falling onto the appara- tus, exposure to rain or moisture, or if the apparatus does not operate normally, or has been dropped.

15.POWER ON/OFF SWITCH: For prod- ucts with a power switch, the power switch DOES NOT break the connec- tion from the mains.

16.MAINS DISCONNECT: The plug should remain readily operable. For rack-mount or installation where plug is not accessible, an all-pole mains switch with a contact separation of at least 3mm in each pole shall be incorporated into the electrical installation of the rack or building.

17.FOR UNITS EQUIPPED WITH EXTER- NALLY ACCESSIBLE FUSE RECEP- TACLE: Replace fuse with same type and rating only.

18.MULTIPLE-INPUT VOLTAGE: This equipment may require the use of a different line cord, attachment plug, or both, depending on the available power source at installation. Connect this equipment only to the power source indicated on the equipment rear panel. To reduce the risk of fire or electric shock, refer servicing

to qualified service personnel or equivalent.