Samson XP25I owner manual XP25i Controls and Layout, English

XP25i Controls and Layout

10

1 3 5 8

2 4 6 7 9

11

ENGLISH

1.Loudspeaker - 5" full-range high efficiency paper cone transducer.

2.Volume/Power Control - This rotary knob controls the level of the microphone input and powers the unit on and off. Turn the control clockwise to turn the system on. Turn the knob counter-clockwise until it clicks to turn the system off.

3.Power Indicator - RED LED illuminates indicating the unit is powered on, ready for operation.

4.iPod Level - This rotary knob controls the level of the iPod to the loudspeaker.

5.Charge Indicator - The Charge Indicator flashes GREEN while the rechargeable battery is charging, and will light steady GREEN when the battery is fully charged. The Charge Indicator will flash RED when the battery is low and the unit is power on.

6.Line Out Jack - 1/8" (3.5mm) auxiliary Line Output. The Microphone, iPod and Line In signals are present at this output.

7.Line In Jack - 1/8" (3.5mm) auxiliary Line Input for connecting an external sound source (CD player, MP3 player, or audio line output from another device).

8.DC Power Input - Connect the supplied AC/DC adaptor to recharge the battery or to supply power to the unit.

9.Microphone Input - 1/4” (6.3mm) Mic level Input jack. Plug the supplied Samson PT40M or another high-impedance microphone into this input.

10.iPod Compartment - The XP25i has a built-in iPod dock which can be used to connect most of the latest iPod models. The iPod signal is controlled by the iPod Level control (#4).

11.Microphone Stand Adaptor - 5/8" female thread adaptor

for mounting the XP25i onto a microphone stand.

ITALIANO ESPAÑOL DEUTSCHE FRANÇAIS

Owner's Manual XP25i 5