Samsung 1080P7 Connection to an Audio System (2 Channel Amplifier)

Connection to an Audio System (2 Channel Amplifier)

Using the audio cables, connect the AUDIO (red and

white) OUTterminals on the rear of the DVD player to the

AUDIO (red and white) INterminals of the Amplifier.

Using the video signal cable(s), connect the VIDEO, S-

VIDEOor COMPONENT OUT terminals on the rear of the

DVD player to the VIDEO, S-VIDEOor COMPONENT IN

terminal of your TV.

Turn on the DVD player, TV, and Amplifier.

Press the input select button of the Amplifier to select

external input in order to hear sound from the DVD player.

Note

- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may causedamage to the speakers and your ears.- Please set the audio in the menu screen according to the Amplifier. (See pages 27-28)- The position of terminals can vary depending on the Amplifier.Please refer to the user's manual of the Amplifier.

• HDMI (High Definition Multimedia Interface)

HDMI is an interface to enable the digital transmission

of video and audio data with just a single connector.

Using HDMI, the DVD player transmits a digital video

and audio signal and displays a vivid picture on a TV

having an HDMI input jack.

• HDMI connection description

HDMI connector - Both uncompressed video data and

digital audio data (LPCM or Bit Stream data).

- Though the player uses a HDMI cable, the player

outputs only a pure digital signal to the TV.

- If TV does not support HDCP(High-bandwidth

Digital content protection), snow noise appears on

the screen.

• Why does Samsung use HDMI?

Analog TVs require an analog video/audio signal.

However, when playing a DVD, the data transmitted

to a TV is digital. Therefore either a digital-to-analog

converter (in the DVD player) or an analog-to-digital

converter (in the TV) is required. During this conver-

sion, the picture quality is degraded due to noise and

signal loss. DVI technology is superior because it

requires no D/Aconversion and is a pure digital sig-

nal from the player to your TV.

• What is the HDCP?

HDCP(High-bandwidth Digital Content Protection) is

a system for protecting DVD content outputted via

DVI from being copied. It provides a secure digital

link between a video source (PC, DVD. etc) and a

display device (TV, projector . etc). Content is

encrypted at the source device to prevent unautho-

rized

RED WHITE

2-Channel stereo amp

Audio Cable