7
English
Rear Panel
1. DIGITALAUDIO OUT JACKS
- Use either an optical or coaxial digital cable to con-
nect to a compatible Dolby Digital receiver.
- Use either an optical or coaxial digital cable to con-
nect to an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.
2. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide PR, PBand Yvideo.
- If P-SCAN Video Output is selected in Setup Menu,
progressive scan mode will work.
- If I-SCAN Video Output is selected in Setup Menu,
interlaced scan mode will work.
3. AUDIO OUT JACKS
- Connect to the Audio input jacks of your television or
audio/video receiver.
4. VIDEO OUT JACK
- Use a video cable to connect to the Video input jack
on your television.
- The Video Output in Setup Menu must be set to
S-Video.
5. S-VIDEO OUT JACK
- Use the S-Video cable to connect this jack to the S-
Video jack on your television for higher picture quality.
- The Video Output in Setup Menu must be set to
S-Video.
6. HDMI OUT JACK
- Use the HDMI cable to connect this jack to the HDMI
jack on your television for the best quality picture.
- If an HDMI cable is connected to an HDMI-compati-
ble TV, HDMI will be output automatically within 10
seconds.
Note
-Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in
the TV’s menu system.
-The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conver-
sion adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.
-There may be no image output if the DVD player is connected to a TV or display that is not compatible
with the above format.
-Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.
-See pages 28 ~ 29to get more information on how to use the setup menu.
113 4562