OPERATION

OPERATING THE

CONVERTER’S

RECEIVER

Press POWER on the converter or remote control to turn the converter and the switched AC outlet on and off. When you turn off the converter, a dot appears on the lower right corner of the display to indicate that the converter is in standby mode.

Press CHANNEL or on the converter to select individual channels, or hold down CHANNEL or to scan channels in the direction of the arrow. The selected channel appears on the display.

Press VOLUME on the converter or

VOL on the remote control to increase the volume, or press VOLUME on the converter or VOL on the

remote control to decrease it.

Press CATV/TV to select either the CATV or TV mode. In TV mode, U (TV) appears before the channel number on the display.

Sample Display Indications

Standby/FavoriteChannel

SleepTimer

ParentalLock

•125 — CATV Channel 125.

•U16 — TV Channel 16.

•U52. — TV Channel 52 is a favorite channel.

•11.5 — CATV Channel 115 is receiving a program and the sleep timer has been set up.

•1.2.5. — CATV Channel 125 is locked and it is also a favorite channel. The sleep timer has been set up.

•⊆⊆ — Press MEM or FAV to start a memory operation.

•∪•∪ — Press PL to activate parental lock.

•∪.1 — the 1st digit of a parental control code.

•∪.2 — the 2nd digit of a parental control code.

•∪.3 — the 3rd digit of a parental control code.

•⊂⊂ — Press FINE TUNE to con- firm your entry, or store a pro- grammed function in memory.

•⊃⊃ — Press FINE TUNE to con- firm your entry, or erase a pro- grammed function from memory.

12