SETTING THE SLEEP TIMER
Follow these steps to set the converter to automatically turn off after a certain length of time (90, 60, or 30 minutes).
1.Press SLEEP. 9.0 appears and the sleep timer indicator lights.
2.Repeatedly press SLEEP until the desired length of time appears.
When the preset time is reached, 00 appears and the converter automatically turns off.
Notes:
•To see the remaining time on the timer, press SLEEP once.
•To turn off the timer, repeatedly press SLEEP until 00 appears. The sleep timer indicator disap- pears and the converter stays on until you turn it off.
USING PARENTAL LOCK (PL)
To prevent children from viewing adult programs (for example), you can lock channels you select then set the converter so it does not tune them.
Note: Your converter’s security code is preset to 2999, but you can change it (see “Changing the Security Code” on Page 16).
Locking a Channel
1.Repeatedly press CH 
or 
on the remote control to select the channel you want to lock.
2.Press PL. ∪∪ appears.
3.Hold down FINE TUNE 
to lock the selected channel. ⊂.⊂ appears to confirm the entry.
4.Release FINE TUNE 
. ∪.∪ appears to indicate the channel is locked.
Watching a Locked Channel
1.Repeatedly press CH 
or 
on the remote control to select the locked channel you want to watch.
2.Press PL then use the number keys on the remote control to
enter the security code (preset to 2999). ∪.1, ∪.2, and ∪.3 appear for about two seconds, then the converter unlocks all channels.
To
15