English 15
Adjusting Your LCD Monitor
■
Manual Tune Due to the weak signals or a wrong antenna
configuration, some of the channels may not be tuned
correctly or there could be a mismatch of the channel
number between a Real channel and a Program
channel.
Use this menu to fine tune and perform necessary
corrective actions.
• Program : Program numbers are given in a
sequential manner based on the search order of
Channel Auto Program.
• Channel: Channel numbers are given according to
the CCIR or Australia standard channel table.
• Save
- Use buttons to fine tune the picture quality
and then select "Save"menu.
Now press "Menu"
button to save the fine tuned channel.
• Add
- Use this function to add a real channel.
- Use buttons to select a desired channel and
then select "Add" menu. Now press "Menu" button
to add the channel.
• Cancel
- Use this menu to undo the current job.
■
Stereo System • In most of the cases, stereo system is automatically
detected. But, in case you are experiencing audio
problem, use this menu to manually select the stereo
system. Currently selected stereo system is
highlighted and you can change the stereo system
manually. Use buttons to select a stereo system.
B/G A2
B/G NICAM
I NICAM
D/K NICAM
Table 1. Screen controls (Continued)
Icon Menus and
Sub-menus
Function Descriptions
4_E150MP170MPbody.fm Page 15 Wednesday, September 19, 2001 2:54 PM