Connecting the FM and AM(MW/LW) Antennas
AUX Connections
1 | 2 | 3 | If AM reception is |
|
|
| poor, connect an |
|
|
| outdoor AM |
|
|
| antenna(not |
|
|
| supplied). |
AM Loop Antenna
(supplied)
ANTENNA
If FM reception is poor,
connect an outdoor FM antenna (not supplied).
FM Antenna (supplied) | Snap the tabs on the loop into the |
| slots of the base to assemble the |
| AM loop antenna. |
External Digital
Components
For connection to external
equipment with digital output.
Example: CD recorders, MD (Mini Disc) D/A converters or other components equipped
with digital output jacks | DIGITAL OUT |
(not supplied) |
Optical Cable |
TV
To view pictures from external input (AUX 1 , AUX 2 ), first connect the
VIDEO IN VIDEO IN jack and then connect the VIDEO OUT jack.
Cooling fan (See “About Cooling Fan” below.)
Audio Cable (Red/White)
If the external analog
component has only one
output jack, you may connect
either L or R.
Video Cable
FM antenna connection
1.Connect the FM antenna supplied to the FM 75 COAXIAL terminal as temporary measure.
2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
•If reception is poor, connect an outdoor antenna. Before attaching a 75 coaxial cable (with a standard type connector), disconnect the supplied FM antenna.
AM(MW/LW) antenna connection
1.Connect the AM loop antenna supplied
to the AM and terminals.
2.If reception is poor, connect an outdoor single
External Analog
Components
R L VIDEO OUT
Connect to external equipment with | • Always connect the video and |
analog output. | audio connection cables to the |
Example: VCR, TV, etc. | equivalent colored jack. |
To Play External Digital/Analog Equipment
(About the cooling fan) |
| For safety, observe the following carefully. |
A cooling fan is mounted on the rear panel of the center unit to | • Make sure there is good ventilation around the center unit. Poor | |
prevent abnormal temperature inside the center unit, thus assuring | ventilation could overheat and cause damage. | |
normal operation. The cooling fan automatically starts rotating to | • DO NOT block the cooling fan and the ventilation openings or | |
supply external cool air to the inside of the center unit when the | holes. (If they are blocked by a newspaper or cloth, etc., the heat | |
internal temperature exceeds the specified limit. | may not be able to escape.) | |
|
|
|
Press AUX on the remote control to select DIGITAL IN, AUX1, or AUX2.
Press Function on the main unit to select DIGITAL IN, AUX1, or AUX2.
•Each time the button is pressed the mode switches as follows: FM ➞ AM ➞ DVD ➞ DIGITAL IN ➞ AUX 1 ➞ AUX 2.
11 | 12 |