Listening to the Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation.
Presetting stations
You can store up to:
15 | FM stations | • FM | Frequency Modulation |
15 | AM stations | • AM(MW) | Medium Wave |
1
2
Example: Presetting FM 89.1 in the memory
Remote
Control
Unit
Press the Tuner(Band) button.
Select a broadcast station.
1
2
3
• The selection toggles back |
and forth between "FM" and |
"AM" each time the |
Auto Station 1
When the 
button is pressed, a preset broadcast station is selected.
Press the Tuner(Band) button and select the FM band.
Select MANUAL by pressing the Stop ( 
) button on the main unit.
Use the ▲▲ and ▲▲ button to tune to 89.1
Tuner(Band) button is |
pressed. |
Auto Station 2
Manual Station
Hold in the 
button. Automatic searching begins, and then stops when a station is tuned in.
Press the 
button to tune to the chosen station. The frequency changes incrementally in either direction each time the corresponding button is pressed.
•The selection toggles back and forth between “FM” and “AM” each time the Tuner(Band) button is pressed.
L | R | L | R | L | R |
| MHZ |
|
|
| MHZ |
Main Unit
1
Press the Function button to select the desired band (FM, AM).
2
Select a broadcast station.
Auto Station 1 Press the Stop ( | ) button to select the PRESET | ||
mode. Then press the |
| button to select a | |
station stored in the preset. See the instructions on the
4
Press the Program button on the remote control, FM1 will flash. If you want to save 89.1 to FM1, press Program again.
5
If you want to save 89.1 to another preset location(FM2~FM15), press 
▲▲ or ▲▲
, then press Program to save it to that location.
6
To preset other stations, follow steps 1~5 again.
next page to preset stations.
| PRGM |
| PRGM |
L | R | L | R |
| MHZ |
| MHZ |
Auto Station 2 Press the Stop ( 
) button to select the MANUAL mode on the front panel. Then hold in the 
button to make the unit begin automatically searching for broadcast stations.
L | R |
MHZ
To Listen in Mono/Stereo
Press the MO/ST button. (FM only)
Manual Station
Audio
MO/ST
Press the Stop ( 
) button to select the MANUAL mode
on the front panel. Press the 
button to tune to the desired station. The frequency changes incrementally in either direction each time the corresponding button is pressed.
To tune in a preset station
See the previous page.
•The selection toggles back and forth between “STEREO” and “MONO” each time the MO/ST button is pressed.
•In a poor reception areas, select Mono mode for a clear,
41
42
