Samsung 213T manual Rear, Stand Height Adjustment

User’s Manual

Introduction

Rear

(The configuration at the back of the monitor may vary from product to product.)

1.	Power port	Connect the power cord for your monitor to the power port on the back
		of the monitor.
2.	DVI port	Connect the DVI Cable to the DVI Port on the back of your Monitor.
3.	D-Sub port	Connect the signal cable to the 15-pin, D-sub connector on the back of
		your monitor.

Stand Height Adjustment

1.Press the top side of the stand and then push the button at the rear bottom of the stand.

2.You can adjust the stand height using this button.

Note: See Connecting Your Monitor for further information regarding cable connections.