Introduction
Note
You can configure the customized key for a required function via Setup > Cus- tomized Key.
Brightness button [
]
When OSD is not on the screen, push the button to adjust brightness.
>>Click here to see an animation clip 
Adjust buttons [
]
These buttons allow you to adjust items in the menu.
Enter button [
] / SOURCE button
Activates a highlighted menu item.
Push the '
/SOURCE', then selects the video signal while the OSD is off. (When the 
/SOURCE button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode
Note
If you select the digital mode, you must connect your monitor to the graphic card's DVI port using the DVI cable.
>>Click here to see an animation clip 
AUTO button
Use this button for auto adjustment.
>> Click here to see an animation clip
Power button [
]
Use this button for turning the monitor on and off.
Rear
Note
The configuration at the back of the monitor may vary from product to product.
POWER port
10
