1. Connect the CATV or antenna coaxial cable to the Antenna termina l on the rear of the monitor.
You need to use a coaxial antenna cable.
2. Turn on the monitor.
3. Select TV using SOURCE button among the external signal adjustment buttons.
4. Select a desired TV channel.
When using an interior antenna terminal:
Check the antenna terminal on the wall first and connect the antenna cable.
When using an outdoor antenna:
If you are using an outdoor antenna, use a professional for installation if possible.
To connect the RF cable to the antenna input terminal:
Keep the copper wire portion of the RF cable straight.
Is weak signal causing poor reception?
Purchase and install a signal amplifier for better reception.
In areas where Antenna cable is not supported, first, attach connector to TV antenna .
3. Connecting DVD/DTV Set Top Box
Connect to the DVD/DTV Set Top Box input if the device has a DVD/DTV co nnector.
You can watch Component simply by hooking up the Component with the monito r as long as the
power is on.