Samsung 2433BW user manual Rear, Adjust buttons, Enter button, Power button, Power Indicator

Introduction

Note

You can configure the customized key for a required function via Setup > Cus- tomized Key.

Adjust buttons []

These buttons allow you to adjust items in the menu.

Enter button []

Activates a highlighted menu item.

Push the '', then selects the video signal while the OSD is off. (When the button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode -- analog or digital input signal.)

Note

If you select the digital mode, you must connect your monitor to the graphic card's DVI port using the DVI cable.

>>Click here to see an animation clip AUTO button

Use this button for auto adjustment.

>> Click here to see an animation clip

Power button []

Use this button for turning the product on and off.

Power Indicator

This light is lit when operating normally, and blinks once when your adjustments are saved.

Note

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended for long periods.

Rear

Note

The configuration at the back of the monitor may vary from product to product.

11