Samsung 244T manual Connecting the Monitor, Cable Fix Ring

Connecting the Monitor

1.Connect the power cord for your monitor to the POWER IN on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.

2-1.Using the D-sub (Analog) connector on the video card.

Connect the signal cable to the 15-pin, RGB IN port on the back of your monitor.

2-2.Using the DVI (Digital) connector on the video card.

Connect the DVI cable to the DVI IN port on the back of your monitor.

2-3.Connected to a Macintosh.

Connect the monitor to the Macintosh computer using the D-sub connection cable.

2-4.In the case of an old model Macintosh, you need to connect the monitor using a special Mac adapter.

3.Turn on your computer and monitor. If your monitor displays an image, installation is complete.

Cable Fix Ring

When connecting the cable is finished, fix the cables to the