Samsung 350 Installing the Stand, Disconnecting the Stand

English - 29
Problem Possible Solution
The picture appears distorted in the
corner of the screen.
If Screen Fit is selected with some external devices, the picture may appear distorted in
the corner of the screen. This symptom is caused by the external devices, not TV.
The ‘Resets all settings to the
default values.’ message appears.
This appears when you press and hold the EXIT button for a while. The product settings
are reset to the factory defaults.
This TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
Installing the Stand
1. Place the front of the TV onto a soft cloth or cushion on a table.
Align the TV bottom along the table edge.
2. Fasten two screws at bottom of the stand.
Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one
side.
Disconnecting the Stand
1. Place the front of the TV onto a soft cloth or cushion on a table.
Align the TV bottom along the table edge.
2. Remove two screws at bottom of the stand.
N
¦
–
N
¦
–
BN68-01975M_00L02.indb 29 2009-04-22 �� 7:51:54