Samsung 460CX-2, 400CXN-2, 400CX-2 Connecting to a Camcorder, Connecting Using a HDMI Cable

Connections

"For an explanation of Component video, consult your DVD or external device's user manual.

Connecting to a Camcorder

1.Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV/COMPONENT AUDIO IN [R-AUDIO- L] on the LCD Display .

2.Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN [VIDEO] on the LCD Display .

3.Select AV for the Camcorder connection using the SOURCE button on the front of the LCD Display or on the remote control.

4.Then, start the Camcorder with a tape inserted.

Note

The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables.

Connecting Using a HDMI Cable

1.Connect input devices such as a Blu-Ray/DVD player to the HDMI IN terminal of the LCD Display using an HDMI cable.

Note

" In HDMI mode, only PCM format audio is supported.

34