Main Icons Select Button
Remocon Info Grid
Safety Lock Display Selection
Port Selection Control Too ls
1. Use the main icons to switch into each screen.
2. Allows you to enable or disable the remote control signal receivin g f un ction of the display unit.
3. Set the Safety Lock function.
When setting the Lock function, you can only ope rate power and lock buttons on the remote cont rol and set.
4. The setting for the PC Serial Port can change. The original value is COM1.
5. Click Select all or Clear to select or clear all displays.
6. Use Grid to view brief information on selected display.
7. Select a display from Display Selection.
8. Use Control Tools to control displays.
<Note> The remote control Enable/Disable function ope rates whether or not the power is On/Off, and this
applies to all displays connected to the MDC. However, regar dless o f th e sta tus at the time the MDC is
shut down, the remote control signal receiving functi o n of all disp lays is initialized to Enable when the
MDC is closed.
Port Selection