- Check the displays to see if any of the other displays connected have the same ID. If more than one displays have
the same ID, those displays are not properly det ec ted by the program due to data conflict.
- Check if the Display Set ID is a number between 0 and 25. (Adjust using the Display menu)
Note : A Display Set ID must be a value between 0 and 25 .
2. The display you wish to control does not appear on the other Control Info Grids
- Check to see if the display power is ON. (You can che ck this in Power Control Info Grid)
- Check if you can change the input source of the display.
3. The dialogue box appears repeatedly.
- Check to see if the display you wish to control is s ele cted.
4. Both On Timer and Off Timer have been set but different time is showing.
- Apply current ti m e to synchronize the dis p l ay clocks.
5. The remote may not function properly when you turn off the remote Function, disconnect the RS-232C cable, or exit
the program in an Irregular manner. Reru n t he program and turn the remote function again to Restore normal
functions .
<Note> This program may malfunction due to proble ms in com munication circuits or interference from electro nic
appliances nearby.
Settings Value Display In Multiple Display Mod e
When there are more than one d isplays connected, the se tt ings values are displayed a s follows.
1. No selection: Displays the Factory Default Value.
2. Selected one display: Fetches and displa ys the settings value for th e selected display.
3. Selected one display (ID1) and add another display (ID3): The prog ram, which was displaying the settings value of
ID 1, fetches and displays the value of ID3.
4. Selected all sets using Select All: Returns to the Factory Default Value.