V-Position
MENU → → ENTER → [Picture] → → → → → ENTER → [Image Lock] → →
→ → ENTER → [V-Position]
→ , → ENTER
Adjusts the screen location vertically.
Auto Adjustment
Note
• This function does not work for this LCD Display.
MENU → → ENTER → [Picture] → → → → → → ENTER → [Auto Adjustment ]
The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution
in the control panel, the auto function is performed.
(Available in PC mode only)
(Not available in Dynamic Contrast mode of On.)
Note
The direct button on the remote control is the 'AUTO' button.
Signal Balance
Note
• This function does not work for this LCD Display.
This is used to make up for the weak RGB signal transmitted by a long signal cable.
MENU → → ENTER → [Picture] → → → → → → → ENTER → [Signal Bal-
ance]
(Available in PC mode only)
(Not available in Dynamic Contrast mode of On.)
Signal Balance
MENU → → ENTER → [Picture] → → → → → → → ENTER → [Signal Bal-
ance] → ENTER → [Signal Balance]
Adjusting the LCD Display
21