Samsung 460UTN-B Setting Picture PC, The Input source of MagicInfo works only on MagicInfo model

Basic information required to adjust the Picture is displayed in the main menu. Settings for the selected monitor will be displayed if one of the connected monitors is selected, and the default settings will be displayed if all monitors are selected by clicking All and Select. If a value is changed in this screen, the current mode will automatically switch to custom mode.

1)Picture

-Available only for TV, AV, S-Video, Component, HDMI1, HDMI2, DTV.

2)Contrast

-Adjusts Contrast of the selected display.

3)Brightness

-Adjusts Brightness of the selected display.

4)Sharpness

-Adjusts Sharpness of the selected display.

5)Color

-Adjusts Color of the selected display.

6)Tint

-Adjusts Tint of the selected display.

-Available only for NT.

7)Color Tone

-Adjusts the Color Tone for the selected display.

8)Color Temp

-Adjusts the Color Temp for the selected display.

9)Brightness Sensor

-Adjusts the Brightness Sensor for the selected display.

10)Dynamic Contrast

-Adjusts the Dynamic Contrast for the selected display.

Brightness Sensor may not be supported depending on the product.

The Input source of MagicInfo works only on MagicInfo model.

Color Temp is only enabled if the Color Tone is set to Off.

The Input source of TV works only on TV model.

This feature is available only for the displays whose power status is ON and if no selection is made, the factory default is displayed.

HDMI2 may not be supported depending on the product.

Setting

Picture PC

1. Click Settings of the main icons and the Settings Control screen appears.