MagicInfo
TV
Note
A TV tuner box (sold separately) must be connected to use the TV. (US Only)
For an 400UX-3, 460UX-3 model, MagicInfo can only be enabled when a network box is
connected.
Multi Control
Assigns an individual ID to the SET.
ID Setup
Assigns distinctive IDs to the SET.
ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID
corresponds to the transmitter setting becomes activated.
MDC Connection
Selects a port to receive the MDC inputs from.
Communicates with the MDC via a RS232C MDC cable.
Communicates with the MDC via an RJ45 MDC cable.
Network Setting
IP Setting : Manual, Auto
IP Address : Manually enter the IP Address if IP Setting is set to Manual.
Subnet Mask : Manually enter the Subnet Mask if IP Setting is set to Manual.
Gateway : Manually enter the Gateway if IP Setting is set to Manual.
MagicInfo
Available Modes
PC / DVI / DisplayPort
AV
Adjusting the LCD Display