Component
HDMI
MagicInfo
For an 400UX-3, 460UX-3 model,
MagicInfo can only be enabled when a network box is connected.
Note
The remote control can be used to select MagicInfo. However, it is recommended to use
a separate USB keyboard to utilize MagicInfo fully.
For MagicInfo in Device mode, moving external devices while booting may cause errors.
Set up external devices only if the LCD Display turns on.
Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the
program (MagicInfo) may stop. If you do unplug the cable, restart the system.
Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the
program (MagicInfo) may stop.
To access other sources, press the SOURCE button in MagicInfo.
The preset password for the LCD Display is "000000".
The server program's Power-On option works only if the LCD Display's power is com-
pletely shut off.
Please make sure not to use the Power-On option when the LCD Display is in the process
of shutting down since this may cause system errors on the LCD Display.
When using MagicInfo with the MagicInfo Server Program: perform Network mode.
When using MagicInfo with the device directly connected to LCD Display : execute Device
mode.
Press ESC to directly go to the MagicInfo Window screen.
To setup MagicInfo on a Windows screen, a keyboard and mouse are required.
To setup MagicInfo on a Windows screen, refer to the MagicInfo Server Help.
It is highly recommended not to turn off the AC power during an operation.
For pivoted LCD Displays, ticker transparency is not supported.
For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for
movies.
For drive D:, EWF is not applied.
To save Setup contents that have been changed when EWF is in the Enable state, you
must Commit them.
By selecting Disable, Enable or Commit, the system is restarted.
MagicInfo
Adjusting the LCD Display