5 Disassembly and Reassembly
6.Remove 4 screws on the Rear Panel Bracket. (15Ó : 6 screws)
Figure
7.Remove the Bracket Assembly from the Front Cover.
8.Remove 1 screw on the Power PCB.
9.Remove Function PCB from locking area of Function Knob.
Figure
10.Remove 4 screws on the Shield of Panel.
11.Remove the Shield.
12.Disconnect the jack between Panel and Inverter PCB.
13.Remove Rear Bracket.
Figure
14.Remove 2 screws between Rear Bracket and Inverter PCB.
15.Remove the Interface wire on the Rear Side of Panel.
5-1-3 Stand Disassembly
1.Stand the stand assembly with the base close to you.
Figure
SyncMaster 33*TFT/53*TFT |