Samsung 530 TFT, 530TFT, 531 TFT, 531TFT, 330TFT Microprocessor Controls and Functions, OSD Window

4 Operating Instructions

4-2 Microprocessor Controls and Functions

This monitor has no Òservice onlyÓ micom controls. Should there be a problem with the microprocessor, replace the entire circuit board. There are, however, user accessible adjustment features that are described below.

This monitor has factory preset display settings for each of the signals listed in the standard display modes Timing Chart (see pages 3-3 and 3-4). As a result, when the monitor senses one of the standard signal timings, it automatically adjusts to an optimum size and position.

However, the user may wish to adjust the monitor to their own preferred settings rather than use those preset at the factory. The monitor saves up to 16 user defined settings.

4-2-1 OSD Window

The adjustable features described below all use the on-screen menu system.

1.Push the ↵ button to open the display the on- screen menu.

2.Use the or button to change an adjustment icon, use the ↵ button to highlight an adjustment icon, then use the + or Ð buttons to make the adjustments.

3.To select another adjustment on the same screen, use the or button to move to the next selection.

4.When you are done making adjustments on an adjustment icon, push the EXIT button.

5.When you are done making all adjustments, push the EXIT button.

Table 4-3 shows the adjustment types and their icons.

Table 4-3. Available adjustments

Icon	Description		Adjustment Range		Icon	Description	Adjustment Range
		IBM	VGA1/70 Hz	0-100		Position	0 ~ 100
				740-860		Horizontal
							0 ~ 100
			VGA2/70 Hz	0-100		Vertical
						Auto Reset
				840-960
	Image Lock		VGA3/60 Hz	0-100		Auto Adjustment	No/Yes
						Geometry	No/Yes
				740-860
	Fine					Color	No/Yes
		VESA	SVGA/56 Hz	0-100
	Coarse
				964-1084		Image Size
							x1, x2, x4, x8
			SVGA/60 Hz	0-100		Zoom
							Normal/Expand
				996-1116		Display Size
			XGA/60 Hz	0-100		Misc.
				1284-1404
						Language
	Brightness	0 ~ 100				Menu Position	0 ~ 100
	Contrast	0 ~ 100				Menu Display Time	0 ~ 100
						Display Mode
	Color Control					Color Temperature
	Red	0 ~ 100				Mode1
	Green	0 ~ 100				Mode2
	Blue	0 ~ 100				Mode3

SyncMaster 33*TFT/53*TFT 4-3