1) Contrast
Adjusts the Contrast.
2) Brightness
A
djusts the Brightness.
Note
• By adjusting the picture using the Custom function, MagicBright will change to Custom mode.
Color Tone
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER]
The color tones can be changed.
1) Off
2) Cool
3) Normal
4) Warm
5) Custom
(Available in PC, BNC mode only)
Note
• If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp function is disabled.
• If you set the Color Tone to Off, the Color Control function is disabled
Color Control
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [ENTER] → [< / >] → [ENTER]
Adjusts the individual R, G, B color controls.
(Available in PC, BNC mode only)
1) Red
2) Green
3) Blue
Note
• If you adjust the picture by using the Cu stom function, Color Tone will turn to the Cusome mode.
• SOURCE - DVI_VIDEO, DVI Source - PC DVI : Not available
Color Temp
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [< / >] → [ENTER]
Color Temp is a measure of the 'warmth' of the image colors.
(This function is only enabled if the Color Tone is set to Off.)
Brightness Sensor
[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [< / >] → [ENTER]
Brightness Sensor is to automatically detect distribution of inputted visual signal and adjust to create optimum
brightness.
1) On
2) Of
f