Samsung 570STFT, 580STFT , Getting Help , Warm-up Time ,

English

If the monitor is functioning properly, you will see a white box with a red border and black

text inside as shown in the following illustration:

Figure 5. Monitor self test screen

The three boxes inside the border are red, green and blue. Failure of any of the boxes to

appear indicates a problem with your monitor. This box also appears during normal operation

if the video cable becomes disconnected or damaged.

Turn off your monitor and reconnect the video cable; then turn on both your computer

and the monitor.

If your monitor screen remains blank after using the previous procedure, check your video

controller and computer system; your monitor is functioning properly.

Getting Help

If your monitor does not display an image, check your cable connections and refer to

“Troubleshooting” on page 20. If you experience difﬁculties with the quality of the displayed

image, run Auto Adjustment (see page 11) and refer to “Adjusting Your FPD” on page 10 or

“Troubleshooting” on page 20.

Warm-up Time

All FPD monitors need time to become thermally stable the ﬁrst time you turn them on each

day. Therefore, to achieve more accurate adjustments for parameters, allow the FPD monitor

to warm (be on) for at least 20 minutes before making any screen adjustments.

Check Signal Cable

Setting up Your Monitor

4_E570S580Sbody.fm Page 9 Monday, July 16, 2001 2:53 PM