Samsung CN15LSAN, 570STFT, CN15LSPS/EDC Automatic Save, Direct-Access Features, Auto Adjustment

Adjusting Your FPD

Automatic Save

Whenever you open the on-screen menu and allow an adjustment window to remain active for about 3 seconds without pressing another button, the monitor automatically saves any adjustments you have made. These changes are saved into a user area in the monitor. User areas are reserved according to the signal frequency from your computer. The monitor can save adjustments for up to 5 user modes. It has 12 factory preset or preload modes, one for each signal frequency as listed in "Display Modes" on page 26.

If you have made no adjustments, the on-screen menu disappears and the monitor does not save anything. To exit without saving the changes you have made, press the EXIT button before the 3 seconds elapse.

Direct-Access Features

The features described in this section can be accessed quickly, at the touch of one button. Once you finish making adjustments to a feature, push the EXIT button to turn off the menu or allow the OSM to time-out and disappear automatically

Auto Adjustment

Even though your computer system can recognize your new FPD monitor, the auto adjustment function will optimize the display settings for use with your computer.

English

Auto Adjustment

75

Follow these instructions to activate the automatic screen adjustments for your monitor.

1	Push the AUTO button. The automatic
	adjustment display appears and the slidebar

moves to indicate progress during the auto adjustment procedure.

NOTE: 1. For Auto Adjustment to function correctly, the monitor must display a full screen, colored image such as the Windows desktop.

2.Even though Auto Adjustment sets most image adjustments automatically, distortions may remain depending on the video board performance. After using Auto Adjustment, we recommend that you perfect the image by using the OSM functions.

11