1. 1
Introduction
Introduction
Thank you for purchasing this laser printer.
The QwikLaser 6100 is a desktop laser printer specially designed for the
demanding small office and home office users. It uses a highly innovative
printing technology, which provides all the performance and power you
need for your business, small workgroup and personal printing.
The QwikLaser 6100N comes standard with network card(PortThru).
Install the network printer driver(SyncThru) for network printing.
Printer Unpacking and Setup
1. Remove the printer and all accessories from the packing carton.
Save the carton and packing materials in case you need to repack the
printer for service or storage.
2. Make sure that your printer came packed with the following items:
• Toner cartridge
• Power cord
• Centronics-compatible parallel cable (IEEE 1284-compliant)
• User Guide (this book)
• Network Printer Card User Guide (QwikLaser 6100N only)
• QwikLaser 6100 CD-ROM
Note: This CD-ROM contains the software required to operate your printer,
along with useful printer utilities. Should your computer not be equipped
with a CD-ROM drive, please refer to “Making Installation Diskettes”
(page 2.17) for detailed instructions for creating installation diskettes.
If any items are missing or damaged, notify your dealer immediately.
3. Carefully remove any shipping tapes from the printer.
4. Place the printer on a flat, stable surface near your workstation. Leave
at least 6 inches (15 cm) behind and on each side of the printer, and at
least 1 foot (30 cm) in front of the printer, so that you can operate it
properly and allow adequate air circulation.
Do not place the printer:
• In direct sunlight.
• Near heat sources or air conditioners. Place the printer where the
temperature is stable and set for comfort.
• In dusty or dirty environments. Dust accumulation may prevent the
printer from functioning properly.
• Near devices that contain magnets or generate magnetic fields (such
as loudspeakers or base units of cordless telephones).