Samsung 8000 user manual Setting Up Anynet+, Switching between Anynet+ Devices

Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.

Anynet+ Menu	Description
View TV	Changes Anynet+ mode to TV broadcast mode.
Device List	Shows the Anynet+ device list.
(device_name) MENU	Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
	the DVD recorder will appear.
(device_name) INFO	Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
	play menu of the DVD recorder will appear.
Recording: (*recorder)	Starts recording immediately using the recorder. (This is only available for devices that
	support the recording function.)
Stop Recording: (*recorder)	Stops recording.
Receiver	Sound is played through the receiver.

If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).

¦Setting Up Anynet+

O MENUm Application Anynet+ (HDMI-CEC) ENTERE

■Setup

Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.

✎When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.

Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.

✎If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off. However, a device may not turn off if recording is in progress.

✎May not be enabled depending on the device.

¦Switching between Anynet+ Devices

1.Anynet+ devices connected to the TV are listed.

✎If you cannot find a device you want, press the Red button to refresh the list.

2.Select a device and press the ENTERE button. You can switch to the selected device.

✎The Device List menu will only appear when you set Anynet+ (HDMI-CEC) to On in the Application menu.

￿Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation.

￿If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.

English 45

04 Advanced Features

‚j_WWWTuh„iu]_TWY^XYhTW]sWZU•‹‰GGG[\

YWXWTW`TWXGGG GXWa[^aYZ