Samsung 8000 user manual Recording, Listening through a Receiver

Pressing the (REC) button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded.

Advanced Features

¦Recording

You can make a recording of a TV Program using a Samsung recorder.

1.Select Recording.

✎When there are more than two recording devices

￿When multiple recording devices are connected, the recording devices are listed. Select one recording device in the Device List.

✎When the recording device is not displayed, select Device List and press the Red button to search devices.

2.Press the EXIT button to exit.

✎You can record the source streams by selecting Recording: (device_name).

✎

✎Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording device’s users manual.

¦Listening through a Receiver

You can listen to sound through a receiver (i.e Home Theater) instead of the TV Speaker.

1.Select Receiver and set to On.

2.Press the EXIT button to exit.

✎If your receiver supports audio only, it may not appear in the device list.

✎The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.

✎When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver.

✎NOTE

￿You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.

￿The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.

￿The Anynet+ functions do not operate with other manufacturers’ products.

Using the ARC function

You can listen to sound through a receiver connected HDMI cable without the need for a separate optical cable.

1.Select Receiver and set to On.

2.Press the EXIT button to exit.

✎To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the HDMI IN 2 (ARC) port.

✎To disable the ARC function, set the Receiver to Off. Even if the TV transmits the ARC signal continuously, the receiver will be blocked from receiving the signal.

46 English

‚j_WWWTuh„iu]_TWY^XYhTW]sWZU•‹‰GGG[]

YWXWTW`TWXGGG GXWa[^aY[