
On-Screen Display
Menu | How to adjust |
|
|
|
|
Video Input Level
Some video cards use video signals higher than 1.0V which causes the display to be very bright. For those video cards, use this feature to select the 1.0 V Level.
1Push the Menu ( ) button.
2Push the ◀ button or ▶ button until the Advanced screen is displayed. Push the ▲ button or ▼ button to select Video Input Level.
3Push the Menu ( ) button to open the Video Input Level selection screen.
4Use the ◀ or ▶ buttons to select 0.7 V or 1.0 V.
Display Timing
You can see the frequency (user control mode) used by the user, the polarity of the operational signals, the default frequency (default mode) set when you buy the monitor and the resolution level. Note: These screens do not allow any changes to the settings, they are for information only.
1Push the Menu ( ) button.
2Push the ◀ button or ▶ button until the Menu screen is displayed.
3Push the Menu ( ) button to open the Display Timing adjustment screen.
4Use the ▼ button to see the user control mode and the default mode.