Control Panel
Anion Indicator |
|
|
|
|
Operating Mode Indicator |
| |||
|
| |||
Indicator |
|
|
|
|
|
|
|
| |
| Clean level Indicator | |||
|
|
|
| |
|
|
| Contamination Level Indicator | |
|
|
|
|
|
Remote Control
Sensor
Filter Reset Button & Indicator | Power Button |
Anion Button |
|
Clean Level Selection Button | |
|
|
Operating Mode Selection Button
Note ◆ 
Indicator
-Displays the Clean Level by differing its blinking speed.
-If the air cleaner is operating at the Pollen Mode, the
Indicator shows the image of big dust particles by blinking.
◆Contamination Level Indicator
-Classifies the various contaminants in the indoor air, as Odor, Mote and Dust, and up to 8 levels can be displayed.
-Green indicates that the indoor air is clean. Red means that the indoor air is contaminated.
-During the first two minutes after the air cleaner is turned on, the contamination level will move up and down because the sensor will be in the
process of analyzing the contamination level of the indoor air. So it is recommended that you check the contamination level in 2 minutes.