Samsung AH68-01957C Setting the DRC Dynamic Range Compression, Setting the HDMI Audio, Setup

Settings (Con’t)

Setting the DRC (Dynamic Range Compression)

This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.

ENG

Setting the HDMI Audio

The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.

	1	In Stop mode, press the MENU button.
	2	Press the Cursor		button to move to <Audio> and then press the ENTER button.
	3	Press the Cursor		button to move to <DRC> and then press the ENTER button.
MOVE ENTER RETURN EXIT	4	Press the Cursor		, button to adjust the DRC.
			When the Cursor	button is pressed, the effect is greater, and when the Cursor button is

pressed, the effect is smaller.

Press the RETURN button to return to the previous level.

Press the EXIT button to exit the setup screen.

CHANGE RETURN EXIT

Setting the AV SYNC

Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match the video.

MOVE ENTER RETURN EXIT

MOVE SELECT RETURN EXIT

1	In Stop mode, press the MENU button.
2	Press the Cursor	button to move to <Audio> and then press the ENTER button.
3	Press the Cursor	button to move to <HDMI AUDIO> and then press
	the ENTER button.
4	Press the Cursor	, button to select <ON> or <OFF> and then press
	the ENTER button.

•ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only.

•OFF : Video is transmitted over the HDMI connection cable only, and audio is output through the home theater speakers only.

• The default setting of this function is HDMI AUDIO OFF.

•HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.

Press the RETURN button to return to the previous level.

Press the EXIT button to exit the setup screen.

MOVE ENTER RETURN EXIT

MOVE SELECT RETURN EXIT

1	In Stop mode, press the MENU button.
2	Press the Cursor	button to move to <Audio> and then press the ENTER button.
3	Press the Cursor	button to move to <AV-SYNC>and then press
	the ENTER button.
4	Press the Cursor	, button to select the AV-SYNC Delay Time and then

press the ENTER button.

You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.

Press the RETURN button to return to the previous level.

Press the EXIT button to exit the setup screen.

SETUP

50 51