Samsung AH68-02019S manual Movie Frame 24 Fs, Resolution

system setup

Movie Frame (24 Fs)

Movies are usually fi lmed at 24 frames per second.			Language Setup
Some Blu-ray Discs have the capability of playing back at this		Photo	Audio Setup	TV Aspect	: 16:9 Wide
frame rate. Setting the Movie Frame (24Fs) feature to ON			Display Setup	movie frame ( fs)	: OnOff
	no Disc	Setup
allows you to adjust the Blu-ray player's HDMI output to 24					Off
			HDMI Setup	Resolution	: 480p
frames per second for improved picture quality.			Parental Setup	Screen Message	: On

System Upgrade

You can enjoy the Movie Fame (24Fs) feature solely on a TV supporting this frame rate.

This menu can only be selected in 1080i or 1080p HDMI output resolution modes.

Depending on the disc, two types of source may be included: Movie material (24 frame) and Video material (30 frame). When switching the source between Movie and Video, the screen may blink for a few seconds.

Resolution

Sets the output resolution of the Component and HDMI video signal.
			Language Setup	TV Aspect	: 16:9 Wide
• The number in 480i, 480p, 720p, 1080p and 1080i indicates
		Photo Audio Setup		Movie Frame (24 Fs)	: Off
the number of lines of video. The i and p indicate interlace	no Disc	Setup			1080p
			Display Setup	Resolution	: 
and progressive scan, respectively.			HDMI Setup	Screen Message	: On
					100i
					720p

- 1080p : Outputs 1080 lines of progressive video.

Parental Setup	480p
System Upgrade
	480i

-1080i : Outputs 1080 lines of interlaced video.

-720p : Outputs 720 lines of progressive video.

-480p : Outputs 480 lines progressive video.

-480i : Outputs 480 lines of interlaced video.

M  Component does not output 1080p.

If the connected TV does not support the movie frame		Language Setup	TV Aspect	: 16:9 Wide
or the selected resolution, you will see the following message:	Photo	Audio Setup	Movie Frame (24 Fs)	: Off

If you select Yes and the resolution is not supported, the TV's screen will be blank.

Setup

no Disc

!

Display Setup	Resolution	:	480p1080p
If no pictures are shown after the selection,
			100i
pleaseHDMIwaitSetupfor 15 secondsScreen.A dMessagethen,		:	On
the resolution will be reverted			720p
toParentalthe previousSetupvalue automaticallyFront Display.		:	Automatic
			480p
WouldSystemyouUpgradelike to make a selection?			480i

Yes no

M  If the screen is blank, press and hold the STOP () button on the front of the player for more than 5 seconds (no disc inserted). All settings are restored to the factory default. Follow the steps on the previous page to access each mode and select the Display Setup that your TV will support.

0