Ht-tZ312
Speaker Components
| (L) (R) |
|
|
|
|
| SCREW (Small): 6EA |
|
|
| CENTER |
(L) (R) | REAR | CENTER | CENTER |
|
| ||
|
|
| |
|
|
| SCREW (Large): 4EA |
|
| REAR | REAR |
FRONT | STAND | HOLE COVER | CRADLE STAND/ SUBWOOFER STAND BASE |
| |||
|
|
| WALL MOUNT |
How to install the Speaker on the Stand
EnG
● COnnECtiOnS
1.Turn the StanD
2.Insert three small SCrEWS into three holes marked with arrows using a screwdriver as shown in the illustration.
. Insert a large SCrEW into the hole on the rear of the Speaker StanD.
. Connect the assembled stand to the SPEaKEr.
5.Insert another large SCrEW into the hole on the rear of the speaker using a screwdriver as shown in the illustration.
. This is the successfully assembled speaker. Make sure that the speaker is installed on a fl at and stable area. Otherwise it may be easily knocked over.
1
STAND
BASE
STAND |
5
2
SPEAKER
STAND
How to install the Speaker on the Stand Base
1.Connect the SPEaKEr with the StanD BaSE.
2.Insert the SCrEW into the hole on the rear of the speaker using a screwdriver as shown in the illustration.
. This is the SPEaKEr successfully assembled with the Stand Base.
1
SPEAKER
STAND
BASE
2
21
