Setup
Before Starting (Initial Settings)
1.Turn on your TV after connecting the product. (When the product is connected to TV for the first time, the product will turn on automatically and display the Initial Settings screen.)
Initial Settings I
Select a language for the
English
Français
Deutsch
Español
Italiano
Nederlands
> Move sSelect
2.Press the ▲▼ buttons to select the desired language, then press the ENTER button.
3.Press the ENTER button to Start.
Initial Settings
TV Aspect, Musical Room Calibration and Network will be set.
Each setting may be changed later under "Settings"
Start
a Previous " Select
4.Press the ▲▼ buttons to select the desired TV aspect ratio, then press the ENTER button. (See page 34)
The Musical Room Calibration screen appears.
5.Plug the ASC microphone into the ASC IN jack on the product. (See page 38)
6.Press the ENTER button to Start.
Initial Settings I Musical Room Calibration
Preparing...
d Skip
Setting the Musical Room Calibration function takes about 3 minutes.
03
7. Press the ◄► buttons to select the desired | Setup | |
Network Settings : Wired, Wireless or | ||
| ||
PBC(WPS), and then press the ENTER button. |
| |
If you do not know your Network Settings, |
| |
press the BLUE (D) button on your remote |
| |
instead to skip Network Settings here, finish the |
| |
Initial Settings, and go to the Home menu. If |
| |
you selected a Network Setting, go to pages |
| |
42~45 for more information about the Network |
| |
settings. When done, go to Step 8. |
|
Initial Settings I Network
Network Setting is needed to use various Internet services.
Choose the primary method for connecting to network.
Wired : Set the network connection using the Ethernet cable.
Please make sure that the Ethernet cable is connected.
Wired Wireless PBC(WPS)
a Previous d Skip <Move " Select
8.Press the OK button.
The home menu appears. (For more information about home menu, please see page 32)
•Home Menu
Please activate Internet@TVinternet radio serviceYou Tube
to enjoy a variety of Internet Services.
No Disc a Change Device | d View Devices " Enter |
✎NOTE
When the product is connected to TV for the first time, the product will turn on automatically. This is not a malfunction.
The home menu will not appear if you do not configure the initial settings, with the exception below.
If you press the BLUE (D) button during the Musical Room Calibration or Network setup, you can access the home menu even if the network setup is not completed yet.
When you return to the home menu, the full screen mode is cancelled automatically.
English 31
