Samsung AK68-01907A Basic functions, Playing a Disc, Using the Search and Skip Functions

C. Connection to an Audio System (2 Channel Amplifier, Dolby Digital,MPEG2 or DTS Amplifier)

-Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier. If using a coaxial cable, connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier

-Using the video signal cable(s), connect the VIDEO or COMPONENT terminals on the rear of the DVD player to the VIDEO or COMPONENT terminals of your TV.

-Turn on the DVD player, TV, and Amplifier.

-Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player.

Refer to your Amplifier's user manual to set the Amplifier's audio input.

Note

-What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the interlace output method has. Progressive scanning method can provide better and clearer picture quality.

Basic functions

Playing a Disc

Before Play

- Using your TV’s remote control, turn on your TV and set it to the Video Input your DVD player is connected to.

-If you connected the DVD player to an external Audio System, turn on your Audio System and set it to the correct Audio Input.

After plugging in the player, the first time you press the DVD POWER button, the screen to the right appears: If you want to select a language, press the π/† button, and then press the ENTER button. (This screen will only appear when you plug in the player for the first time.) If the language for the startup screen is not set, the settings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use.Once you select a menu language, you can change it by pressing ( ■ / ) the button on the front panel of the unit for more than 5 seconds with no disc in the unit. Then the SELECT MENU LANGUAGE window appears again where you can reset to your preferred language.

Using the Search and Skip Functions

During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection.

2-Channel stereo ampilfier,

Coaxial Cable C Dolby Digital or DTS amplifier

BLUE	GREEN
WHITE

RED WHITE

WHITE

Searching through a Chapter or Track

During play, press the SEARCH ( or ) button on the remote control for more than 1 second. - If you want to search at a faster speed on the DVD or CD, press the SEARCH button.

RED

RED

YELLOW

Video Cable B

Audio Cable	A Component Cable
YELLOW	BLUE
RED WHITE
RED	GREEN

RED

DVD	2X,	4X,	64X, 128X
CD	2X,	4X,	8X

Skipping Tracks

Note

-The speed marked in this function may be different from the actual playback speed.

-No sound is heard during search mode (Except CD).

During play, press the SKIP ( or ) button.

-When playing a DVD, if you press the SKIP () button, it moves to the next chapter. If you press the SKIP ( ) button, it moves to the beginning of the chapter. One more press makes it move to the beginning of the previous chapter.

-When playing a CD, if you press the SKIP () button, it moves to the next track. If you press the SKIP ( ) button, it moves to the beginning of the track.

Using the Display Function

When Playing a DVD/MPEG4

1.During play, press the INFO button on the remote control.

2.Press the π/† buttons to select the desired item

3.Press the √/® buttons to make the desired setup and then press the ENTER button.

4.To make the sceen dissapear, press the INFO button again.

6