Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much.
1 If necessary, press the 
(On/Off) button.
Result: ◆ The power indicator on the control panel comes on.
◆The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Switched on
◆Stopped
lt will start up normally after three minutes.
2 If the 
is not displayed on the control panel, press the 
button on the remote control one or more times until it appears.
Result: ◆ The indoor unit beeps each time you press the 
button. ◆ The air conditioner runs in the Dry mode.
Note You can change modes at any time.
3To adjust the temperature, press the 
buttons one or more times until the required temperature is displayed. Possible temperatures are between 18°C
and 30°C inclusive.
Result: ◆ Each time you press the 
buttons: - The temperature is adjusted by 1°C.
- The indoor unit beeps.
◆The air conditioner starts removing the excess humidity;
◆ the quantity of air is adjusted automatically.
4 The fan speed is selected automatically( | : Automatic). |
5To control the direction of the air flow, refer to page 16.
