Cooling Your Room
ENGLISH
You must select the Cool mode if you wish to adjust the:
◆Cooling temperature
◆Fan speed when cooling
1 If necessary, press the 
(On/Off) button.
Result: | ◆ The 5 Way indicator on the indoor unit lights up. |
| ◆ The air conditioner starts up in the mode selected |
| when the unit was last used. |
| ◆ The indoor unit beeps. |
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Plugged in
◆Stopped
lt will start up normally after three minutes.
2 If the 
is not displayed at the top of the remote control,
press the 
button on the remote control one or more times until it appears.
Result: | ◆ | The indoor unit beeps each time you press the | button. |
| ◆ | The air conditioner runs in COOL mode. |
|
Note You can change modes at any time.
3 To adjust the temperature, press the 
buttons one or more times until the required temperature is displayed.
Possible temperatures are between 65°F(18°C) and 86°F(30°C) inclusive.
Result: ◆ Each time you press the 
buttons: - The temperature is adjusted by 1°F - The indoor unit beeps
◆ The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature; the fan will, however, operate.
4 Select the fan speed by pressing the 
button one or more times until the required setting is displayed:
Automatic (rotated : 
)
Low
Medium
High
Result: Each time you press the 
button, the indoor unit beeps.
5To control the direction of the air flow, refer to page 16 and 17.
